넓히다
재설정하는 방법
Make sure you remove the Bluetooth profile on your device first before resetting
1단계
Make sure your S-PLAY is charged before resetting then remove them out of the case
2단계
Turn on your S-PLAY by holding the Power On Button for 2 seconds. They will go to pairing mode which will be indicated by the flashing white and blue LEDs.
3단계
Continue holding onto the S-PLAY for another 5 seconds to turn them off and hold for another 10 seconds and the LED should flash once.
4단계
Your device has been resetted and can now be connected to your Bluetooth enabled device.
1단계
Make sure your S-PLAY is charged before resetting then remove them out of the case
2단계
Turn on your S-PLAY by holding the Power On Button for 2 seconds. They will go to pairing mode which will be indicated by the flashing white and blue LEDs.
3단계
Continue holding onto the S-PLAY for another 5 seconds to turn them off and hold for another 10 seconds and the LED should flash once.
4단계
Your device has been resetted and can now be connected to your Bluetooth enabled device.
